RFID RD 1 Reader

RFID RD 1

The RFID RD 1 was specially designed for access control since it can be easily connected to access control terminals.

This product works at a 125 kHz frequency, compatible with most 125 kHz cards for number extraction, or at 13.56 MHz, in the Mifare (NFC) version, compatible with the ISO 14443A standard.

This reader has a specific communication protocol to communicate with other Acronym products, which allows, for example, that a IOBoard will automatically detect the reader when it is connected to it.

This reader can be controlled online by 4 products:

When doing a reading, by approaching a RFID card, tag or key to the reader, the data is sent to a terminal or to a IOBoard that validates the content of the information for access, time or production control purposes.

To power up this reader, it can be used a 7 to 24V continuous energy power source. This features facilitates the installation process since you can use the same power source for the reader and for a door latch.

The reader/recorder can work, USB connected, in two aways:

  • - HID - for firmware upgrade;
  • - Keypad - works as a computer keyboard, typing the data readed from the card in decimal, weigand or hexadecimal format.

This reader can be integrated with other hardware devices through a versatile interface that allows digital output in the following modes:

  • - Magnetic - can replace magnetic card readers with clock and data signals;
  • - Serial - serial transmission in decimal or hexadecimal format and reader deactivation input;
  • - Acronym Serial - serial interface for communication with Acronym's controllers/terminals.

We have RS485 adapters available that allow you to connect these readers to the controller over long distances. For more details, please contact us.

Features:

  • - Compatible with 125 kHz cards or Mifare 1K, 4K and Ultralight cards (Mifare version);
  • - T5577, T5555, ISO/IEC 14443 type A (Mifare version) and others standards;
  • - Bidirectional USB HID communication;
  • - No need for driver installation;
  • - USB keyboard emulation;
  • - Compatible with Windows for reading;
  • - Compatible with Linux and Android in keyboard mode;
  • - 125 kHz or 13.56 MHz (Mifare version) frequency;
  • - Acoustic beetle;
  • - USB powered;


  • - Additional power input of 7V to 24V;
  • - Weight: less than 100 g;
  • - Resinous internal electronics (total protection against moisture);
  • - Dimensions: 43mm x 80mm x 14mm;
  • - Red/green LED;
  • - Firmware upgrade by USB;
  • - Magnetic reader emulation;
  • - Digital serial port emulation;
  • - Configuration jumpers;
  • - Card number extraction in decimal, hexadecimal or weigand;
  • - Compatible with Acronym's terminals and others.