RD Bio 1

RD Bio 1

The RD Bio 1 comes equipped with a high performance and awarded worldwide biometric sensor for fingerprints reading/validation.

These modules have a RJ12 connector for the cable connection with the controller. The same cable is used for the communication and also for power source, both provided by the controller.

This module/reader can be controlled online by these products:

The RD Bio 1 modules have a quick link connector for power sources from 9 to 32 V and another one for door opening by internal relay triggering.

In the module you can connect:

  • - Communication/power cables;
  • - Electromagnetic locks;
  • - Latches;
  • - Emergency button;
  • - Internal violation sensor;
  • - Continuous current up to 32V;
  • - UPS 9V.

The access is validated/authorized by the controller and the user realizes the validation/authorization through the bicolor LED and by the sound emited the RD Bio 1.

Features:

RD Bio 1
  • - Biometric sensor with a capacity up to 1900 fingerprints;
  • - World-renowned biometric sensor;
  • - Internal buzzer - the module signals operations performed with audible warnings;
  • - Low power consumption;
  • - Mechanical relay for connection to latches or door locks;
  • - Micro USB port for firmware upgrade;
  • - High strength and durability;
  • - High tolerance power supply - 9 to 32 V DC;
  • - Photo-coupled input;
  • - Open door sensor input;
  • - Green and red LEDs;
  • - RJ45 / RS485 connector - for connection and data communication up to 500m;
  • - RS485 dedicated communication protocol;
  • - Dimensions: 62 mm x 100 mm x 35 mm;
  • - Internal 125 kHz RFID reader (optional);
  • - Robust case;
  • - Relay quick-connect connector and open door sensor;
  • - Wireless communication (optional).