BioLock 1

BioLock 1

The BioLock 1 is a access validator with a stand-alone configuration and operation. To configure it, you do not need any access control software, just use its infrared controller.

This device is able to validate previously registered fingerprints and only these fingerprints can activate the internal relay and open the door. Depending on the version, the BioLock 1 may also validate RFID cards.

With the BioLock 1 infrared controller you can:

  • - Collect a new fingerprint;
  • - Delete a fingerprint or a user;
  • - Delete all fingerprints, RFID and users;
  • - Configure the door opening time and the operating mode;
  • - Configure the door open timeout;
  • - Delete all cards or users;
  • - Change the access password;
  • - Configure the open door sensor operation;
  • - Register new RFID card or device (RFID reader version only).

This product is available in two versions:

  • - With 125 kHz RFID reader;
  • - Without 125 kHz RFID reader.

Its plastic box gives a certain elegance to the final result.

This BioLock 1 is a wall installation version. Another version of this device, with identical functionalities, is also available in a built-in/embedded version, differing only in terms of design and ease of installation.

It's no doubt a simple solution to an equally simple access control.

Features:

  • - Biometric sensor with a capacity up to 1900 fingerprints;
  • - World-renowned biometric sensor;
  • - Internal IR (infrared) receiver;
  • - Includes IR controller;
  • - Internal buzzer;
  • - Low power consumption;
  • - Mechanical relay for latches and electromagnetic locks activation;
  • - Micro USB port;
  • - High strength and durability;
  • - Power from 9 to 32 volts DC;
  • - Photo coupled input;
  • - Open door sensor input;
  • - Green and red LEDs;
  • - Non-volatile memory for data storage;
  • - Validation of up to 800 preconfigured identifiers;
  • - Firmware upgrade via USB;
  • - Fast-connect connectors for power and relay connections;
  • - Dimensions: 62 mm x 100 mm x 35 mm;
  • - Internal 125 kHz RFID reader (optional);
  • - Robust case.